Cleaning the cleaning filter is important for several reasons. First of all, the filter serves to hold back the dust and dirt aspirated from the dust aspirate, so if the filter is clogged or blocked, the vacuum cleaner could become less effective in collecting dirt.
In addition, the clogged filter can cause an increase in air resistance that the vacuum cleaner must overcome, making the engine of the vacuum cleaner more difficult to move and increasing energy consumption.
Finally, an clogged filter can cause an increase in engine temperature, increasing the risk of overheating and damage to the vacuum cleaner. In summary, it is important to clean the filter of the vacuum cleaner to maintain the efficiency of the device and extend its life.
So recapitious it is important to clean the filter for:
-
Optimal performance: the filter of the vacuum cleaner serves to hold back the dust and dirt, so that they do not return to the environment. If the filter is clogged, the vacuum cleaner does not work as it should, making cleaning more difficult.
-
Energy saving: a clean filter allows the aspiratory to work more efficiently, consuming less energy.
-
Duration of the appliance: if the filter is clogged, the vacuum cleaner will have to work more hard to suck the dirt, putting more pressure on the engine and reducing the duration of the appliance.
In addition, the cleaning of the filter is also important to maintain the air of the house clean and to avoid breathing dust and other harmful particles.
To clean the filter of the vacuum cleaner, it may be necessary to follow these steps:
-
Turn off the vacuum cleaner and disconnect it from the power outlet.
-
Find the filter. Usually, the filter is located in the upper or lateral part of the vacuum cleaner. It may be necessary to remove a lid or panel to access the filter.
-
Remove the filter from the vacuum cleaner. It may be necessary to press a button or rotate the filter to release it from the vacuum cleaner.
-
Clean the filter. If the filter is very dirty, it may be necessary to wash it under running water. Make sure you shake the filter well to remove all dust and debris. If the filter is only slightly dirty, it may be enough to pass the air through it to remove dirt.
-
Dry the filter. Before reassembling the filter, make sure it is completely dry. If the filter is still a little humid, it may be necessary to wait for it to dry completely before reassembling it.
-
Remove the filter. Insert the filter into the vacuum cleaner and make sure it is well placed in place. Close the lid or panel and turn on the vacuum cleaner.
In conclusion, it is essential to make ordinary maintenance of the filters to avoid a whole series of problems including the most serious, which is the breakdown of the vacuum cleaner.
As always, constant maintenance is recommended on all appliances.